|
|
| Tên thương hiệu: | HUATEC |
| Số mô hình: | 1707 |
| MOQ: | 1 CÁI |
| Chi tiết đóng gói: | Gói xuất tiêu chuẩn |
| Điều khoản thanh toán: | T/T, PayPal, Western Union |
Paint Inspection Gauge
Product Introduction:
1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g. aluminum, iron, plastic, wood, concrete, glass etc.
Introduction:
1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g.:aluminum, iron, plastic, wood, concrete, glass etc.
Using Principle:
A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.
Standard:
ASTM D4138, DIN 50986, ISO 2808
Technical Specification:
| Cutter | Cut Angle | Range(μm) | D Factor(μm) |
| No.1 | 45° | 20-1800 | 20 |
| No.2 | 63.4° | 10-900 | 10 |
| No.3 | 84.3° | 2-180 | 2 |
Measurement Principle:
Operating Steps:
| Step | Illustration | Description |
| 1 | |
Prepare the inspecting area |
| 2 | |
Draw a line with the marker pen on the surface |
| 3 | |
Cut the coating vertically and make sure it is lacerated |
| 4 | Read the graduation-scale with the microscope to attain thickness |
Order Information:
1707 Paint Inspection Gauge
Including 1 pc of No.1 cutter, battery, marker pen and carrying case
Order Information of Accessories:
1707 PIG/1 Cutter No.1
1707 PIG/2 Cutter No.2
1707 PIG/3 Cutter No.3
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
Xếp hạng tổng thể
Ảnh chụp nhanh về xếp hạng
Sau đây là phân phối của tất cả các xếp hạngTất cả đánh giá