|
|
| Tên thương hiệu: | HUATEC |
| Số mô hình: | HPT-750 |
| MOQ: | 1 cái |
| Chi tiết đóng gói: | trong thùng |
| Điều khoản thanh toán: | L/C, T/T, Liên minh phương Tây |
Pencil Hardness Tester
Product Introduction:
Through leaving a superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness.
1301 Pencil Tester complies with the requirements of ASTM D3363 and ISO 15184 standard, through leaving a superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface.Use variety of different hardness pencils,the angle between pencil and the coated surface is 45°, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.
Technical Specification:
Pressure of pencil tip: 1000/750/500g
The angle between pencil and film surface is 45°
Three points are touched on the tested surface (roller, pencil tip)
Built-in spirit bubble, convenient to check level when tester is working
Scratch Speed: 1 mm/sec
Mitsubishi pencils are available upon request
Order Information:
| 1301/500 Pencil Hardness Tester (500g) |
| 1301/750 Pencil Hardness Tester (750g) |
| 1301/1000 Pencil Hardness Tester (1000g) |
Packing List:
1. Pencil Tester, Body
2. 1 Set of Pencils ( 12 ) :-4B-3B-2B-B-HB-F-H-2H-3H-4H-5H-6H.
3 . Special Pencil Sharpener
4 . Abrasive Paper, 400 grade grit.
5. Spirit bubble
6. Calibration Certificate
Băng hình
Băng hình
Băng hình
Băng hình
Băng hình
Xếp hạng tổng thể
Ảnh chụp nhanh về xếp hạng
Sau đây là phân phối của tất cả các xếp hạngTất cả đánh giá