-
Máy dò lỗ hổng siêu âm
-
Máy đo độ dày siêu âm
-
Đo độ dày lớp phủ
-
Máy đo độ cứng di động
-
Máy phát hiện lỗi tia X
-
Các máy thu thập thông tin đường ống X-quang
-
Máy dò kỳ nghỉ
-
Kiểm tra hạt từ tính
-
Thiết bị kiểm tra dòng điện xoáy
-
Kiểm tra thâm nhập
-
Đường đo độ bền trên bờ
-
Máy kiểm tra độ cứng Brinell
-
máy đo độ cứng rockwell
-
Máy đo độ cứng Micro Vickers
-
Máy kiểm tra độ cứng vật liệu
-
máy đo độ rung
-
máy đo độ nhám bề mặt
-
Máy chiếu hồ sơ
-
Máy đo độ bóng
-
Thủy thử bê tông
-
Máy đo nhiệt độ hồng ngoại laser
-
BobKhối kiểm tra hiệu chuẩn Astm E114-15 Inch Loại 1018 Carbon Steel Mini Iiw 2
-
WilliamKhối kiểm tra hiệu chuẩn Astm E114-15 Inch Loại 1018 Carbon Steel Mini Iiw 2
-
tomKhối kiểm tra hiệu chuẩn Astm E114-15 Inch Loại 1018 Carbon Steel Mini Iiw 2
-
Sư TửKhối kiểm tra hiệu chuẩn Astm E114-15 Inch Loại 1018 Carbon Steel Mini Iiw 2
HGS911HD Vibration Balancer With USB 2.0 Interface / FFT Spectrum Analyzer Easy To Use

Liên hệ với tôi để lấy mẫu miễn phí và phiếu giảm giá.
WhatsApp:0086 18588475571
WeChat: 0086 18588475571
Ứng dụng trò chuyện: sales10@aixton.com
Nếu bạn có bất kỳ mối quan tâm nào, chúng tôi cung cấp hỗ trợ trực tuyến 24 giờ.
xMức ồn (không có đầu vào rung) | ACC<0,25 m/s2, VEL<0,5mm/s, Độ phân giải<1m | Độ chính xác đáp ứng tần số | 5% + 2 chữ số |
---|---|---|---|
phi tuyến tính | 5% + 2 chữ số | Phạm vi nhiệt độ hoạt động | 0 - 50C |
Lái xe | Máy đo gia tốc có đầu nối dài và giá đỡ từ tính, Cảm biến tốc độ tùy chọn | Phạm vi đo tốc độ quay | 10-60000 vòng/phút |
Lưu trữ | 200 bộ ID, gia tốc, vận tốc, chuyển vị, đường bao và quang phổ | Kích thước | 150 x 70 x 25 (mm) |
Trọng lượng | 320 gram (bao gồm cả pin) | ||
Làm nổi bật | portable vibration meter,digital vibration meter |
HGS911HD Balancer / Vibration Spectrum Analyzer / Data Collector
HGS911HD is an easy operate and small sized economical vibration Spectrum analyzer & data collector. It can be used for overall vibration measurement, spectrum analysis and measurement of high frequency acceleration envelope design makes it very effective for bearing fault detection. HGS911HD testing data can be outputed to computer for database and trending analysis.
It is also a low-cost, easy-to-use balancing meter with the measurement of Amplitude,Rotation speed RPM, & Phase measurement.
Features:
Easy to use FFT spectrum analyzer, 400 lines
Measurement of high frequency acceleration envelope makes it a very effective bearing fault detector
Download from computer database point / location ID & upload overall value to database for trending
Powerful standard condition monitoring software
Parameter selection of Acceleration, velocity, displacement and acceleration envelope for FFT.
USB 2.0 interfaces to computer
Date/Time & Battery Status Display
True RMS measurement
RPM, Amplitude, Phase measurement for balancing
Specification:
Maximum measurement range / Resolution / frequency range (may change):
Parameter |
Maximum Measurement Range |
Maximum Resolution |
Frequency Range |
Displacement Peak-Peak value | 2 mm | 1 micron | 10 – 500Hz |
Velocity RMS value | 200mm/s | 0.1 mm/s | 10 – 1000Hz |
Acceleration Peak value | 180m/s2 | 0.1 m/s2 | 10 – 15000Hz |
High Frequency Acceleration Envelope | 20unit | 0.1unit | 5Hz-2kHz # |
# Note: Demodulated from 15kHz-40kHz
Accuracy of vibration measurement:
Noise Level (without vibration input): ACC<0.25 m/s2, VEL<0.5mm/s, Disp<1mm
Non-linearity: ±5% + 2 digits
Frequency response accuracy: ±5% + 2 digits
Rechargeable Li-ion battery, Automatic power off, >20 hours operation time
Operation temperature range: 0 - 50°C
Pickup: Accelerometer with extension stinger and magnetic mount,
Optional tacho-sensor Optional 1 or 2 accelerometers. For 2 accelerometers, a mechanical switch provided.
Rotation speed measurement range: 10-60000 RPM
Storage: 200 sets of ID, acceleration, velocity, displacement, envelope & spectrum
Size: 150 x 70 x 25 (mm)
Weight: 320 gram (including battery)
Trouble-Shooting
Symptom | Trouble-shooting |
The magnetic mount has no attraction force | Take off the protective iron cover on the bottom of the magnetic mount. |
Cannot power on. |
1. Press and hold the On button for around 5 seconds then release; 2. The voltage of the battery may be low. Recharge the battery. |
Spurious point name appears |
1. Format the memory 2. The battery voltage may be low. Recharge battery and power on again. |
Measurements not stable |
|
Communication fault |
|
If other faults are found, make detailed records and contact HUATEC Group Corporation, www.huatecgroup.com.
Maintenance
Battery Charging
Rechargeable battery is used in HUAEC Group HGS911HDD data collector. It will take several hours to fully charge the battery and then it will be ready for >20 hours of continuous operation.
Calibration
HUAEC Group HGS911HD and accelerometer should be calibrated periodically. The cycle of calibration is normally one year.